View UPC8151TB-E3-A_1332094.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SILICON RFIC LOW CURRENT AMPLIFIER FOR UPC8151TB CELLULAR/CORDLESS TELEPHONES
FEATURES
* SUPPLY VOLTAGE: Vcc = 2.4 to 3.3 V * LOW CURRENT CONSUMPTION: UPC8151TB; Icc = 4.2 mA TYP @ 3.0 V
Gain, GP (dB)
+20
INSERTION POWER GAIN vs. FREQUENCY AND VOLTAGE
Tuned at 1 GHz
* HIGH EFFICIENCY: UPC8151TB; P1dB = +2.5 dBm TYP @ f = 1 GHz * POWER GAIN: UPC8151TB; GP = 12.5 dB TYP @ f = 1 GHz * OPERATING FREQUENCY: 100 MHz to 1900 MHz (Output port LC matching) * EXCELLENT ISOLATION: UPC8151TB; ISOL = 38 dB TYP @ f = 1 GHz * HIGH DENSITY SURFACE MOUNTING: 6 pin super minimold or SOT-363 package
VCC = 3.3 V +10
0
VCC = 3.0 V VCC = 2.4 V
-10 0.3
1.0
3.0
Frequency, f (GHz)
+20
DESCRIPTION
Gain, GP (dB)
Tuned at 1.9 GHz
NEC's UPC8151TB is a silicon RFIC designed as a buffer amplifier for cellular or cordless telephones. This low current amplifier operates on 3.0 V and is housed in a 6 pin super minimold package. The IC is manufactured using NEC's 20 GHz fT NESATTM III silicon bipolar process. This process uses silicon nitride passivation film and gold electrodes. These materials protect the chip surface from external pollution and prevent corrosion/ migration. Thus, this IC has excellent performance, uniformity and reliability.
VCC = 3.0 V +10 VCC = 3.3 V
0
-10 0.3
1.0
3.0
Frequency, f (GHz)
ELECTRICAL CHARACTERISTICS (TA = 25 C, VCC = VOUT = 3.0 V, ZL = ZS = 50 , at LC matched frequency)
PART NUMBER PACKAGE OUTLINE SYMBOLS Icc GP ISOL P1dB PARAMETERS AND CONDITIONS Circuit Current, No signal Power Gain Isolation f = 1.00 GHz f = 1.90 GHz f = 1.00 GHz f = 1.90 GHz UNITS mA dB dB MIN 2.8 9.5 12.0 33.0 29.0 -1.0 -3.0 - - 2.0 1.0 UPC8151TB SO6 TYP 4.2 12.5 15.0 38.0 34.0 +2.5 +0.5 6.0 6.0 5.0 4.0 10.0 12.0 -62.0 54.0 MAX 5.8 14.5 17.0 - - - - 7.5 7.5 - -
Output Power at 1 dB Compression Point f = 1.00 GHz f = 1.90 GHz Noise Figure f = 1.00 GHz f = 1.90 GHz
dBm dB
NF RLIN
Input Return Loss(without matching circuit) f = 1.00 GHz f = 1.90 GHz Output Return Loss (with external matching circuit) f = 1.00 GHz f = 1.90 GHz 3rd Order Intermodulation Distortion f1 = 1.000 GHz, f2 = 1.001 GHz, PO(each) = -20 dBm f1 = 1.900 GHz, f2 = 1.901 GHz, PO(each) = -20 dBm
dB
RLOUT
dB
IM3
dBc
California Eastern Laboratories
UPC8151TB ABSOLUTE MAXIMUM RATINGS1 (TA = 25C)
SYMBOLS VCC PD TA TSTG PARAMETERS Supply Voltage Total Power Dissipation Operating Temperature Storage Temperature
2
UNITS V mW C C
RATINGS 3.6 200 -40 to +85 -55 to +150
RECOMMENDED OPERATING CONDITIONS
SYMBOLS VCC TA f PARAMETERS Supply Voltage Operating Temperature Operating Frequency UNITS MIN V C MHz 2.4 -40 100 TYP MAX 3.0 +25 3.3 +85 1900
Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB (TA = 85C).
PIN FUNCTIONS
Pin No. 1 Symbol INPUT Applied Voltage Description Signal input pin. An internal matching circuit provides a 50 match over a wide bandwidth. This pin must be coupled to signal source with a blocking capacitor. Internal Equivalent Circuit
4
4 OUTPUT Vcc through external inductor. Signal output pin. This output is designed as an open collector. Due to the high impedance output this pin should be externally equipped with an LC matching circuit.
6
1
6 Vcc 2.4 to 3.3 Power supply pin. This pin should be externally equipped with a bypass capacitor to minimize ground impedance. Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. All the ground pins must be connected together with wide ground pattern to minimize impedance difference.
2
5
3
2 3 5
GND
0
UPC8151TB TYPICAL APPLICATION EXAMPLE
Location Examples in Digital Cellular
RX
DEMOD
I Q
VCO SW
.N .
PLL
PLL
0 TX PA
I
90
Q
PRODUCT LINE-UP (TA = +25 C, VCC = 3.0 V, ZL = ZS
PARAMETER PART NO. Icc (mA)
= 50 ) PACKAGES
OUTPUT PORT MATCHING FREQUENCY 1 GHz 1.9 GHz GP ISOL P1dB GP ISOL P1dB (dB) (dB) (dBm) (dB) (dB) (dBm) 12.5 12.5 23.0 39 38 40 -4.0 +2.5 -4.5 13.0 15.0 17.5 37 34 35 -4.0 +0.5 -8.5
UPC8128TB UPC8151TB UPC8152TB
2.8 4.5 5.6
6 pin super minimold 6 pin super minimold 6 pin super minimold
TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified)
CIRCUIT CURRENT vs. VOLTAGE
6 No Signals 5
CIRCUIT CURRENT vs. TEMPERATURE
5
VCC = 3.0 V
Circuit Current, ICC (mA)
4
Circuit Current, ICC (mA)
4
3
3
2
2
1
1
0 0 1 2 3 4
0 -60
-40
-20
0
+20
+40
+60
+80
+100
Supply Voltage, VCC (V)
Temperature, TA (C)
UPC8151TB TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified)
1.0 GHz OUTPUT PORT MATCHING INSERTION POWER GAIN vs. FREQUENCY AND VOLTAGE
+20 VCC = 3.3 V +10 0
+10 0 +20 VCC = 3.0 V TA = +85C
INSERTION POWER GAIN vs. FREQUENCY AND TEMPERATURE
Gain, GP (dB)
VCC = 3.0 V VCC = 2.4 V
TA = +25C TA = -40C
Gain, GP (dB)
-10 -20 -30 -40
-10 -20 -30 -40 -50
-50 0.1
0.3
1.0
3.0
0.1
0.3
1.0
3.0
Frequency, f (GHz)
Frequency, f (GHz)
ISOLATION vs. FREQUENCY AND VOLTAGE
-30 VCC = 2.4 V
ISOLATION vs. FREQUENCY AND TEMPERATURE
-30 VCC = 3.0 V
TA = -40C
Isolation, ISOL (dB)
-40
-40
-50 VCC = 3.3 V VCC = 3.0 V -60
Isolation, ISOL (dB)
-50
TA = +25C
-60
TA = +85C
-70 0.1
0.3
1.0
3.0
-70 0.1 0.3 1.0 3.0
Frequency, f (GHz)
Frequency, f (GHz)
INPUT RETURN LOSS vs. FREQUENCY AND VOLTAGE
0 VCC = 2.4 V
0
INPUT RETURN LOSS vs. FREQUENCY AND TEMPERATURE
TA = -40C
Input Return Loss, RLIN (dB)
Input Return Loss, RLIN (dB)
-5 VCC = 3.0 V VCC = 3.3 V -10
-5 TA = +25C TA = +85C -10
-15
-15
VCC = 3.0 V -20 0.1 0.3 1.0 3.0
VCC = 3.0 V -20 0.1 0.3 1.0 3.0
Frequency, f (GHz)
Frequency, f (GHz)
UPC8151TB TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified)
1.0 GHz OUTPUT PORT MATCHING OUTPUT RETURN LOSS vs. FREQUENCY AND VOLTAGE
+10
+10
OUTPUT RETURN LOSS vs. FREQUENCY AND TEMPERATURE
Output Return Loss, RLIN (dB)
Output Return Loss, RLIN (dB)
0
0
VCC = 3.3 V -10 VCC = 3.0 V VCC = 2.4 V -20
TA = +85C -10 TA = +25C TA = -40C -20
-30 0.1 0.3 1.0 3.0
-30 0.1 0.3 1.0 3.0
Frequency, f (GHz)
Frequency, f (GHz)
OUTPUT POWER vs. INPUT POWER AND VOLTAGE
+10 VCC = 3 V +5
+5 +10
OUTPUT POWER vs. INPUT POWER AND TEMPERATURE
VCC= 3.0 V
Output Power, POUT (dBm)
Output Power, POUT (dBm)
TA = +85C
0 -5 -10 -15 -20 -25 -30 -40 VCC = 3 V
VCC = 3 V
0 -5 -10 -15 -20 -25 -30 -40
TA = +25C TA = -40C
-35
-30
-25
-20
-15
-10
-5
0
+5
-35
-30
-25
-20
-15
-10
-5
0
+5
Input Power, PIN(each) (dBm)
Input Power, PIN(each) (dBm)
Output Power of Each Tone, PO(each) (dBm) 3rd Order Intermodulation Distortion, IM3 (dBC)
OUTPUT POWER OF EACH TONE AND 3rd ORDER INTERMODULATION DISTORTION vs. INPUT POWER OF EACH TONE
+10 0 -10 -20 IM3 -30 -40 -50 -60 -70 -80 -40 VCC = 3.0 V f1 = 1000 MHz f2 = 1001 MHz POUT
3rd ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE AND VOLTAGE
3rd Order Intermodulation Distortion, IM3 (dBC)
60 f1 = 1000 MHz f2 = 1001 MHz 50 VCC = 3.3 V 40 VCC = 3.0 V 30
20
VCC = 2.4 V
10
-35
-30
-25
-20
-15
-10
-5
0
+5
0 -20
-15
-10
-5
0
+5
Input Power of Each Tone, PIN(each) (dBm)
Output Power of Each Tone, PO (each) (dBm)
UPC8151TB TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified)
1.0 GHz Output Port Matching NOISE FIGURE vs. VOLTAGE
7.5
7.0
Noise Figure, NF (dB)
6.5
6.0
5.5
5.0
4.5 2.0 2.5 3.0 3.5
Voltage, VCC (V)
1.9 GHz Output Port Matching
INSERTION POWER GAIN vs. FREQUENCY AND VOLTAGE
+20
ISOLATION vs. FREQUENCY AND VOLTAGE
-20 VCC = 2.4 V
Input Return Loss, RLIN (dB)
VCC = 3.3 V +10 VCC = 3.0 V
-30
-10 -20 -30 -40 -50 VCC = 3.0 V
Isolation, ISOL (dB)
0
-40
-50 VCC = 3.0 V -60 VCC = 3.3 V
-60 0.1
0.3
1.0
3.0
-70 0.1
0.3
1.0
3.0
Frequency, f (GHz)
Frequency, f (GHz)
INPUT RETURN LOSS vs. FREQUENCY AND VOLTAGE
0 VCC = 2.4 V
0
OUTPUT RETURN LOSS vs. FREQUENCY AND VOLTAGE
Output Return Loss, RLOUT (dB)
VCC = 2.4 V
Input Return Loss, RLIN (dB)
-5
-5
VCC = 3.0 V -10 VCC = 3.3 V
VCC = 3.0 V -10 VCC = 3.3 V
-15
-15
-20 0.1
0.3
1.0
3.0
-20 0.1
0.3
1.0
3.0
Frequency, f (GHz)
Frequency, f (GHz)
UPC8151TB TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified)
1.9 GHz Output Port Matching OUTPUT POWER vs. INPUT POWER AND VOLTAGE
+10 VCC = 3.3 V +5
Output Power Of Each Tone, PO (each), (dBm) 3rd Order Intermodulation Distortion, IM3 (dBc)
OUTPUT POWER OF EACH TONE AND 3RD ORDER INTERMODULATION DISTORTION vs. INPUT POWER OF EACH TONE
+10 0 -10 -20 -30 -40 -50 -60 -70 -80 -40 IM3 VCC = 3.0 V f1 = 1900 MHz f2 = 1901 MHz POUT
Output Power, POUT (dBm)
VCC = 3.0 V 0 -5 -10 -15 -20 -25 -30 -40 VCC = 2.4 V
-35
-30
-25
-20
-15
-10
-5
0
+5
-35
-30
-25
-20
-15
-10
-5
0
+5
Input Power, PIN (dBm)
Input Power Of Each Tone, PIN (each) (dBm)
3rd Order Intermodulation Distortion, IM3 (dBc)
3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE AND VOLTAGE
60
7.5
NOISE FIGURE vs. VOLTAGE
50
7.0
Noise Figure, NF (dB)
40
VCC = 3.3 V
6.5
30
6.0
VCC = 3.0 V
20 VCC = 2.4 V 10
5.5
5.0
0 -25
4.5
-20
-15
-10
-5
0
+5
2
2.5
3
3.5
Output Power of Each Tone, PO (each) (dBm)
Voltage, VCC (V)
UPC8151TB TYPICAL SCATTERING PARAMETERS (TA = 25C)
3.0 G
0.1 G
0.1 G
2.0 G
1.0 G
2.0 G 3.0 G
1.0 G
S11--Frequency
S22--Frequency
VCC = VOUT = 3.0 V, ICC = 4.2 mA FREQUENCY S11 MHz MAG ANG 100 .843 -16.0 200 .752 -27.1 300 .666 -32.4 400 .603 -36.8 500 .555 -40.5 600 .528 -44.8 700 .517 -49.9 800 .525 -54.4 900 .545 -58.9 1000 .571 -62.8 1100 .580 -67.3 1200 .588 -71.3 1300 .571 -76.4 1400 .563 -82.3 1500 .553 -88.8 1600 .552 -95.2 1700 .551 -101.5 1800 .550 -107.5 1900 .536 -113.3 2000 .517 -119.8 2100 .495 -127.1 2200 .484 -135.3 2300 .484 -142.6 2400 .490 -148.5 2500 .499 -152.5 2600 .499 -155.8 2700 .485 -157.4 2800 .464 -160.6 2900 .439 -164.1 3000 .416 -168.6 3100 .403 -173.6
S21 MAG 1.202 1.197 1.221 1.299 1.398 1.513 1.691 1.815 2.008 2.189 2.399 2.560 2.736 2.865 2.946 3.077 3.083 3.174 3.164 3.193 3.149 3.143 3.135 3.120 3.053 2.991 2.958 2.810 2.866 2.713 2.635 ANG -178.9 -177.5 -175.4 -174.5 -174.0 -174.9 -176.2 -178.2 179.5 175.7 171.2 165.9 157.5 151.3 143.3 137.0 130.1 123.9 117.4 110.7 104.4 97.3 90.5 83.5 78.4 71.4 68.0 62.9 57.5 54.5 48.0 MAG .000 .003 .003 .004 .005 .005 .007 .007 .006 .009 .007 .007 .008 .008 .006 .006 .009 .009 .006 .009 .010 .011 .012 .015 .016 .018 .018 .021 .022 .025 .030
S12 ANG 69.5 120.2 103.2 92.8 88.8 95.2 67.5 72.4 84.5 78.3 60.0 89.5 67.2 79.6 79.9 91.4 102.3 100.5 109.5 115.9 124.2 122.4 131.7 138.1 136.3 142.9 143.9 142.5 149.3 148.4 143.6 MAG .996 1.009 .998 .986 .968 .968 .971 .972 .960 .936 .926 .933 .941 .930 .906 .895 .888 .884 .885 .881 .870 .867 .866 .868 .866 .864 .858 .852 .872 .864 .867
S22 ANG -3.3 -6.9 -9.9 -13.8 -17.3 -20.4 -23.1 -25.8 -29.3 -32.8 -36.3 -39.5 -42.0 -45.0 -48.1 -51.5 -54.8 -57.3 -60.5 -63.4 -66.6 -69.8 -72.3 -75.5 -78.7 -82.5 -86.6 -89.7 -93.4 -96.6 -101.0
UPC8151TB OUTLINE DIMENSIONS (Units in mm)
PACKAGE OUTLINE SO6
LEAD CONNECTIONS
(Top View) (Bottom View)
2.10.1
2.00.2 0.65 1.3 0.65
0.2 +0.1 -0
C2U
1.250.1
3
4
4
3
2
5
5
2
1
6
6
1
0.9 0.1 0.7
1. INPUT 2. GND 3. GND 4. OUTPUT 5. GND 6. Vcc
0 ~0.1
+0.1 0.15 -0.5
ORDERING INFORMATION
PART NUMBER UPC8151TB-E3-A QUANTITY 3K/Reel MARKING C2U
Note: Embossed tape, 8 mm wide. Pins 1, 2 and 3 face perforated side of tape.
TEST CIRCUIT
VCC
Output Port Match L1 6 50 IN 1 4 C1 50 OUT
FOUR 900 MHz 1900 MHz L1 12 nH 2.7 nH C1 0.68 pF 0.47 pF All Other Caps = 1000 pF
2, 3, 5
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) * Internet: http://WWW.CEL.COM 9/29/2000 DATA SUBJECT TO CHANGE WITHOUT NOTICE
4-282
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.
4-283

▲Up To Search▲

Price & Availability of UPC8151TB-E3-A

	To Download UPC8151TB-E3-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .